How to install Elevn Disc Brake Mount for CHASE ACT 1.0 and RSP 4.0

12 March 2019

We give you some tips and tricks from Pete Dylewski and Billy Griggs on how to install the Elevn Racing Disc Brake kit for the Chase BMX ACT 1.0 frame and the RSP 4.0 frames.

CHASE RSP 4.0 DISC BRAKE KIT

DESIGNED FOR CHASE RSP 4.0 FRAMES EXCLUSIVELY
The Kit includes the following:
– Full CNC Alloy Adaptor for the 120mm Disc Brake Mount only
– 10mm rear axle set up, pin bolt security
– 120mm Disc Brake Rotor fastening system ISO 6 screws with air vents
– 6 Disc screws and washers included
– 2 sets of Covers Brake pivot bolts to replace the standard brake mounts for a clean, aero design look. (Black and Polished pair)

CHASE ACT 1.0 DISC BRAKE KIT

DESIGNED FOR CHASE ACT 1.0 FRAMES EXCLUSIVELY
The Kit includes the following:
– 120mm Disc Brake Rotor fastening system ISO 6 screws with air vents
– Full CNC Alloy Adaptor for 120mm Disc Brake Mount only
– Full CNC Chain Tensioner to work with adaptor (opposite side to the disc)
– Pin bolt security, 6 Disc screws and washers included
– 2 covers brake cleats to replace the standard brake mounts for a clean, aero design look.

Options for both 10mm (3/8″) or 20mm rear axle set up

Both Brake kits requires a rear hub with ISO 6 screw fastener
Sold without hydraulic braking system

Check over at BRGstore.com to see what is left in stock or ask your local dealer to order you one today!

BRG BRANDS WEBSITE
Chase Bicycles Web Site
Elevn Technologies Web Site
Ikon BMX Web Site
Excess BMX Components Web Site
Insight BMX Components Web Site
Position One Web Site

BACK TO NEWS

BMX RACING GROUP
Powered by  GDPR Cookie Compliance
Privacy Overview

Respect for privacy and personal data

Under no circumstances will the data collected (email via the contact form or telephone numbers) via the site www.bmxracinggroup.com be transferred or sold to third parties and will not be subject to any transfer outside the territory of the European Union.

The data collected will be kept for 36 months:

from collection or last contact for prospects,
from the end of the commercial relationship for customers.

In accordance with the “Informatique et Libertés” law of January 6, 1978 as amended, you have the rights to question, access, rectify and delete information that concerns you.

To exercise this right, send us an email to: webmaster@bmxracinggroup.com or a postal letter addressed to: BMX RACING GROUP - 20435 GRAMERCY PLACE SUITE 103 - TORRANCE CA 90501. You can also use the Privacy Policy page to export or delete them.